VVKB ATV, UTV & Snowmobile Engine Block Heater — Built-in Pump, Warms Up in 30 Min
Only 7 in stock
Stop Wasting 20 Minutes Every Cold Morning
Your ATV or UTV deserves a warm start — not a cold struggle. The VVKB Titan-P1 warms your engine to operating temperature in 30 minutes, so you're ready to ride the moment you need to.
- Fits your ATV or UTV — works with 5/8", 3/4", and 1" coolant hoses — copper adapters included
- Built-in magnetic pump circulates coolant faster — no external pump needed
- Two thermostats hold temperature between 45°C–65°C (113°F–149°F) — never overheats
- 8,000-hour heating tube — built to outlast 10+ winters
- Install it yourself in under 45 minutes, no mechanic needed
- TUV, CE, RoHS & FCC certified — passes North American and European safety standards
Technical Specifications
| Rated Voltage | 110V / 230V |
| Rated Power | 1000W / 1500W / 2000W |
| Frequency | 60Hz / 50Hz |
| Interface Diameter | 5/8" (16mm) standard — copper adapters to 3/4" (19mm) and 1" (25mm) included |
| Pump Type | Magnetic pump |
| Pump Flow Rate | 900L/Hr |
| Thermostat | Two units, 45°C–65°C (113°F–149°F) |
| Heating Tube Material | Copper |
| Heating Tube Life | 8,000 hours |
| Shell Material | Aluminum alloy die-casting |
| Waterproof Rating | IP X4 |
| Weight | 1.8 lbs (0.8 kg) |
| Certification | TUV, CE, RoHS, FCC |
| Warranty | One year |
What Vehicles Does It Fit?
The Titan-P1 fits any liquid-cooled engine with a 5/8" (16mm), 3/4" (19mm), or 1" (25mm) coolant hose — copper adapters included:
- ATVs — Polaris, Can-Am, Yamaha, Honda, Kawasaki, Suzuki
- UTVs / Side-by-Sides — Polaris Ranger, Can-Am Defender, Yamaha Wolverine
- Snowmobiles — Ski-Doo, Polaris, Arctic Cat, Yamaha
- Small cars and compact vehicles
- Small marine engines and generators
Not sure if it fits your vehicle? Contact us at info@vvkb.com and we'll confirm compatibility before you order.
How to Install
- Cut your coolant hose and insert the Titan-P1 in series
- Position the heater 10–20 cm (4"–8") below the engine coolant level
- Make sure the outlet faces toward the engine
- Bleed any trapped air from the hose before use
- Plug in and let it run — your engine will be warm in 30 minutes
Need help? Watch our step-by-step installation video or contact us at info@vvkb.com
Frequently Asked Questions
Will it fit my ATV, UTV, or snowmobile?
It fits any liquid-cooled ATV, UTV, or snowmobile with a 5/8" (16mm), 3/4" (19mm), or 1" (25mm) coolant hose — copper adapters are included in the box. Not sure? Email us at info@vvkb.com before ordering.
How long does installation take?
Most riders complete installation in under 45 minutes with basic tools. No mechanic needed.
How long before I drive — do I plug it in overnight?
You only need 30 minutes. Plug it in before you get ready, and your engine is warm by the time you head out.
Will it work in -40°F / -40°C weather?
Yes. The Titan-P1 is designed for extreme cold and works effectively in temperatures as low as -40°F (-40°C).
Does it affect my cooling system?
No. The Titan-P1 connects in series with your coolant hose. There is no resistance inside the heater, so your cooling system performance is not affected.
How do I attach the copper adapters?
Thread the copper adapter directly onto the Titan-P1's 16mm port by hand, then wrap the thread once with PTFE tape to seal it. No tools needed. Once attached, connect your coolant hose to the adapter
Which wattage should I choose?
1000W works for most ATVs, UTVs, and snowmobiles. Choose 1500W for larger engines or temperatures below -20°F (-29°C). 2000W is available on the 230V version only — suited for large displacement engines in extreme cold.
What is your return policy?
If you're not satisfied with your order, you can return it within 7 days of receiving the product for a full refund. The heater must be unused and in its original packaging. Contact us to initiate a return.
What if my heater develops a fault?
All Vvkb engine block heaters come with a 1-year warranty. If your heater isn't working as expected, contact our support team — we'll walk you through a few quick diagnostic checks first. Most issues turn out to be installation-related and can be resolved in minutes. If the tests confirm a hardware fault, we'll ship you a replacement unit directly at no charge.
See the Titan-P1 in Action
Watch what's inside the box and how each component fits together before you start your installation. Knowing the parts before you begin saves time and avoids mistakes.
Titan-P1 Internal Structure
The Titan-P1 packages the heating tube, magnetic pump, and thermostat into one compact unit. The pump circulates heated coolant through your entire engine block — not just near the heater — so your engine warms up evenly.
Titan-P1 Installation Diagram
Connect the Titan-P1 in series into your coolant hoses, with the outlet facing toward the engine. The heater has no internal flow resistance, so it won't affect your cooling system's ability to dissipate heat once the engine is running.
Titan-P1 Dimensions
The Titan-P1's standard port is 5/8" (16mm). If your ATV, UTV, or snowmobile runs 3/4" or 1" coolant hoses, we include adapter fittings — 16mm to 19mm and 16mm to 25mm — so you can match your hose diameter. You'll connect the adapters to the heater ports yourself before installation.
Titan-P1 Inlet & Outlet Ports
Connect the inlet to your coolant return line and make sure the outlet faces upward. Getting this orientation right is the single most important step — it lets air bubbles escape and keeps the heater running without issues.
