Vvkb Apollo G1 Gasoline Air Heater — 2KW 12V

• No diesel tank needed — connect directly to your existing gasoline tank and run your heater off the same fuel your engine uses.

• Full 2KW heat in 90 seconds — from a cold start, you get maximum output before most heaters have even begun to warm up.

• CE & RoHS certified — independently tested and approved, not self-declared.

No Diesel Tank. No Extra Fuel. No Hassle.

The Apollo G1 runs on your vehicle's existing gasoline tank — no second fuel type, no separate tank to install.

Most cabin heaters require diesel. For gasoline vehicles, that means a separate tank, a second fuel stop, and one more thing to manage on every trip. The Apollo G1 removes all of that.

You connect the fuel line directly to your existing tank. At maximum output, the heater draws 0.08 GPH (0.30 L/hr). An overnight run at moderate heat uses under 2 liters.

Built for Gasoline. Not a Diesel Heater in Disguise.

Gasoline and diesel require completely different combustion setups — different air-to-fuel ratios, different ignition temperatures, different burn speeds. The Apollo G1 is engineered from the ground up for gasoline.

The air-to-fuel ratio inside the Apollo G1 is calibrated specifically for gasoline combustion. You get clean, complete burns at every heat level — which means less carbon buildup and a longer service life.

Ignition is handled by a Kyocera ceramic glow plug, the same type used in precision industrial applications. It fires reliably at -40°F (-40°C) with every start. The control board reads each ignition in real time, confirming the flame before the heater reaches full output.

Specifications

Fuel Type	Gasoline (petrol)
Heat Output	2KW (6,800 BTU/hr)
Voltage	12V DC
Working Voltage	10.5V–15V
Starting Current	5.5A
Running Current	1.7A
Fuel Consumption (max)	0.08 GPH (0.30 L/hr)
Time to Full Power	90 seconds
Noise Level	Dynamically balanced blower
Operating Temperature	-40°F to +140°F (-40°C to +60°C)
Unit Weight	2.7kg (5.9 lb)
Full Kit Weight	~7kg (15.4 lb)
Safety	Overheat protection
Certifications	CE, RoHS

What's in the Box

Everything you need for a standard installation is included. You only need to connect the fuel line to your existing gasoline tank — no extra purchases required.

• Apollo G1 heater unit
• Control panel with remote control
• Fuel pump with mounting bracket
• Fuel filter
• Flexible exhaust pipe with muffler (3 clamps included)
• Hot air outlet duct
• Combustion air intake pipe
• 3m PA12 fuel tubing — gasoline-rated, 5–8 year lifespan
• Mounting plate
• Complete mounting hardware

Frequently Asked Questions

Does the Apollo G1 have problems with carbon buildup?

Carbon buildup is a real issue in gasoline heaters that run with a poorly calibrated air-to-fuel ratio. The Apollo G1's combustion system is specifically calibrated for gasoline, which produces cleaner, more complete burns and significantly less residue.

To further reduce buildup: run the heater at full power for 5–10 minutes before each shutdown. This burns off any unburned residue in the combustion chamber before it can accumulate.

Is it safe to run while sleeping? Will carbon monoxide enter the cabin?

Yes — and this is the most common question about any combustion heater. The Apollo G1 draws all combustion air from outside the cabin and routes all exhaust outside through the exhaust pipe. No combustion gases enter your living space during normal operation.

We still recommend installing a standalone CO detector in any vehicle with a combustion heater. It's the same standard practice used with any gas appliance in a confined space.

Can I connect it directly to my vehicle's existing gasoline tank?

Yes. The included 3m PA12 fuel tubing connects directly to your existing gasoline tank — the same tank your engine uses. No separate fuel tank needed. The tubing is gasoline-rated with a 5–8 year lifespan.

How much fuel does it use overnight?

At maximum 2KW output, the Apollo G1 consumes 0.08 GPH (0.30 L/hr). Running at moderate heat through an 8-hour night uses under 2 liters — less than half a gallon for a full night of heat.

Will it drain my battery overnight?

Once running, the Apollo G1 draws only 1.7A at 12V. The brief startup phase draws 5.5A. A standard 100Ah auxiliary battery easily handles a full night of operation. Running off a split-charge or solar setup, the overnight draw has minimal impact.

What maintenance does the Apollo G1 need?

Plan for an annual combustion chamber inspection and cleaning — standard practice for any combustion air heater. Between services, running the heater at full power for 5–10 minutes before shutdown helps burn off residue before it accumulates. Replace the fuel filter once a year as routine preventive maintenance.