Skip to content
Close (esc)

From Cold Starts to Cozy Rides

Buy It Now
Spend $46 to get free shipping

Exhaust Pipe Clamps for Diesel Heater Parking Heater

Regular price $43.90

Quantity

Only 3 in stock

The advantages of the exhaust pipe clamps:

 

  • The exhaust pipe clamps are made of stainless steel, and it’s corrosion resistant.
  • The threaded screw is directly fixed on the exhaust pipe clamps. It is convenient for the customer to operate.
  • the exhaust pipe clamps is suitable for diameter 24-26 mm (9/10 inches - 1 inch) exhaust pipe.
  • The exhaust pipe clamps can be applied to Webasto heaters, Eberspaecher heater as well as any other brands of diesel heaters.
  • Victor Industries Ltd. can customize the certain exhaust pipe clamps according to users’ needs.

 


VVKB exhaust pipe clamps are made for parking heaters and diesel heaters. Made of 304 stainless steel,

 

VVKB heavy-duty exhaust pipe clamps are suitable for exhaust pipes with diameter 24 - 26 mm (9/10 in. to 1 in.) .

 

The screws and spring washers on the clamp are made of stainless steel too. To be convenient, the thread is directly fixed on the clamp.

 

VVKB exhaust pipe clamps is also suitable for Webasto and Eberspacher and Warmda Heater.

 

The detailed description of the exhaust pipe clamp is as follows:


VVKB choose stainless steel as material. It is corrosion resistance with good-looking appearance.

 

VVKB exhaust pipe clamps are suitable for the exhaust pipe with diameter 24-26 mm (9/10 in. to 1 in.).

 

VVKB exhaust pipe clamps are made of stainless steel sheets with the thickness of 1.2 mm. It will have good corrosion resistance.

 

Even after long-term use, the clamps always keep bright and new. A sufficient thickness gives VVKB exhaust pipe clamps a strong clamping force.

 

The standard components used in VVKB exhaust pipe clamps are made of stainless steel too. They are also corrosion-resistant.

 

With stainless steel screws with the diameter of 6 mm, stainless steel flat washers, stainless steel spring washers, stainless steel nuts and clear and smooth thread, VVKB exhaust pipe looks fantastic.

 

VVKB exhaust pipe clamps can also be used on Webasto heaters, Eberspaecher heaters as well as any other Chinese diesel heaters.

 

 

 

Why Choose Genuine Vvkb Heater Parts

These are genuine Vvkb parts, made by the same factory that builds our diesel and gasoline heaters since 1996. You get the exact spec your heater was designed around — not a third-party part that "should fit."

Made by the heater manufacturer — every part matches the original design, so it drops in and works the way the factory intended, not a reverse-engineered guess.

Fits Vvkb and most other brands — most diesel air heater parts share the same standards, so these fit Vvkb, Chinese 2KW–8KW units, and many Webasto and Espar heaters. Compare against your old part to confirm.

Built to last, not to a price — genuine materials and workmanship are why an original part outlasts the cheap copies that look identical but fail early. You replace it once, not every season.

Bought direct — you order straight from the manufacturer and get answers from the people who build the heater, not a reseller flipping no-name stock.

Covered if it's faulty — if a part arrives defective or fails from a manufacturing fault, we replace it. No guesswork, no runaround.

See the Workmanship for Yourself

This video puts two Vvkb accessories next to worn competitor parts — the fuel pump and the glow pin. The same care goes into every accessory we build. Pick the part you need and order below.

Vvkb Fuel Pump

Here a Vvkb fuel pump sits next to a worn competitor pump. Look at the casing, the fittings, and the finish — the difference shows before it ever runs. Vvkb pumps fit Vvkb heaters and most other diesel air heaters.

Back to top

Shopping Cart

Your cart is currently empty

Shop now